Ingeo-Logo WEB-134-756
 
PLA - 3D Printing Filament
Size: 1.75mm & 2.85mm  
Nozzle size Any Nozzle temp. 190-230° C Bed temp. 0° C/(50-80° C)
Layer height 0.1-0.35mm Print surface Any Print speed Any
Fan 50-100% NOTE: Start with 0.2mm Layer height and 200° C 
Printing Suggestions: Suggested Printing settings are meant as guidelines to find the ideal settings for your machine. 
 

INGEO PLA FILAMENT PERFORMANCE

Performance Requirement Market Expectation Ingeo Performance ABS Performance
Temperature in printing Lower is better for safety and control 190-230°C possible, sharp melting behavior 230-250°C
Vapor or odor in printing, EH&S Low or no emissions / smell, small particulates Very low emissions & studies show lower particulate count Strong negative odor and higher particulate count
Heated build chamber Ideally not required & IP limits implementation for some users Does not require heated build chamber, but opportunity to leverage Required to avoid warping while mfg. larger parts
Fusing performance Fuses easily, sticks to self and build chamber Good fusing and build platform adhesion Difficult to stick to certain build platforms
Thermal shrinkage Low shrinkage Excellent, low shrink Warps on larger builds
PLA 1.75mm LIGHT BLUE 1KG
NZ $40.00
Excl GST
PLA 1.75mm BLACK 1KG
NZ $35.00
Excl GST
PLA 1.75mm CLEAR 1KG
NZ $40.00
Excl GST
PLA 1.75mm GREEN 1KG
NZ $40.00
Excl GST
PLA Pro 1.75mm WHITE 1KG
NZ $40.00
Excl GST
PLA Pro 1.75mm CLEAR 1KG
NZ $40.00
Excl GST
PLA 1.75mm BLACK 5KG
NZ $200.00
Excl GST
R-PLA 3mm BLACK 0.5KG
NZ $30.00
Excl GST
PLA 3mm CLEAR 1KG
NZ $35.00
Excl GST
PLA 3mm GREEN 1KG
NZ $35.00
Excl GST
PLA 3mm CHOCOLATE 1KG
NZ $35.00
Excl GST
PLA Pro 3mm CLEAR 1KG
NZ $40.00
Excl GST
R-PLA 1.75mm BLACK 0.5KG
NZ $30.00
Excl GST
PLA 1.75mm CAST GREY
NZ $82.00
Excl GST
PLA 3mm CAST GREY 0.5KG
NZ $48.00
Excl GST
PLA 3mm CAST GREY
NZ $67.50
Excl GST
   
 
Contact us
 
  • 27A Waipareira Avenue
    Henderson, Auckland 0610 New Zealand
Contact us

Imagin Social-01    Imagin Social-02    Imagin Social-03